sponser

Monday, December 7, 2009

Typeshala, Open and Turnoff computer

Starting Microsoft Windows XP(Opening Computer)
To open the Computer, we should follow the following steps: Ø Please Check the power supply
Ø Press the Power button of CPU Box.
(As you press the power button, the computer checks its memory)
Ø Click on [User Name] and type correct password in [Password] text box.
Ø Then press [Enter] key. If username and password is accepted the Windows Desktop can be seen.

2. Turn off the computer
Ø Click on [start] button on the [Taskbar].
Ø Click on [Turn off Computer].
Ø The following [Turn off Computer]. Dialog box appears.
Ø Click on [turn off].
Ø There will take few seconds to close computer.
(Note: If the power supply system of the computer is AT. You need to press the power the power button OFF. But if it is ATX, the power will OFF automatically.)
3. Restart the Computer
Restart means reloading an Operating System during a computing session.
Ø Click on Start
Ø Click on Turn off computer command
(The same above dialog box, you have used to turn off the computer. appears.)
Ø Click the Restart option.
(Note: There are two processes to restart the operating system. We can also press reset button beside the above process. Reset means to return a system to its initial state. This is an alternate process for reloading the system.)
Typshala
1.Introduction
Typshala is a bilingual typing tutor which covers lessons on English and Devanagari Scripts .It also provides free hand typing and entertains the user with a small game.
Practice lessons
User can type and practice the stored Lessons covering different rows of the keyboards .Typshala divided the Keyboard into Four different rows i.e. four different Lessons ,viz Home Row, Top Row ,Bottom Row ,All Rows .Each Lessons are further divided into three different Levels on the basis of Hard lessons i.e., Levels 1,Levels 2 and Level 3.
1.1.Process:-
Ø Click at Lessons at Menu Bar(ALT+L)
Ø Click at the Required Row in the POP Up Menu
Ø Choose the Required Level (Level 1, Level 2, Level3)
(Note: If this is users first action after loading Typshala , a dialog box will appear for entering user name.)
Ø Type the Text appearing on the screen.
Typshala accepts the correct letters only otherwise a beep sound is heard .As the user finishes typing across the screen, next line appears .The speed (words per minute) is shown on the Tool Bar at the Right corner.
Ø Click at the Required button (home ,Top, Bottom, all)
Ø Click at Level1 or Level 2or Level3 Button
(Note: You can also follow step 2 first and step 1 next.)
Follow step 4 described earlier,
Ø Click at Perform
Ø Click at New User
(New Dialog Box named User Identification Appears which shows the stored names.)
User can do the following things.
Ø Choosing a name
Ø Click at the required name
Ø Click at ok
Ø Renaming
Ø Click at the required name
Ø Click at Renaming
Ø Press ok
warp fevicall

No comments:

Post a Comment